x2-10gb-lr patch cord

 

 

 

 

10GBASE-LR X2 Module for SMF - читайте инструкцию онлайн или скачивайте в формате PDF. Всего страниц: 5 To ensure that specifications are met, the transmitter output should be coupled through a mode conditioning patch cord.Cisco X2-10GB-LR The Cisco 10GBASE-LR Module supports a link length of 10 kilometers on standard single-mode fiber (SMF, G.652). OptiCons X2-10GB-LR-OP is a single mode Cisco Compatible X2 transceiver that also conforms to the X2 MSA standard.The X2-10GB-LR-OP consists of a 10.3Gbps transmitter and receiver and has a fully integrated clock and data recovery mechanism (CDR). DB:2.42:X2-10gb-Lx4, Minimal Distance - Could I Use Singlemode Patchcord? fd. I need to connect two 6506 with X2-10GB-LX4, they reside in adjacent racks, so the patch cord length is no more than 10 meters.Is it possible to connect X2-10GB-LR to 10GBASE-SR with 4-5 metre patch cord? Page 1 of 6. Data Sheet. mode conditioning patch cord is required for applications over OM3. Cisco XENPAK-10GB-LR / -LR: Supports a link length of 10 km on standard single-mode fiber (SMF) (G.652).

100Gb, QSFP28-2 x QSFP28 (2x50Gb) Direct attach passive copper breakout, 1m.40Gb QSFP Parallel Single Mode (PSM) LR4, MPO connector (8 fiber), SMF, 10km. MPO to 4xLC Breakout Patch Cord, SM, 10m. Add to Cart. 10320 Extreme Networks 40GBase QSFP-LR4, 10 Km, Four 10Gbps CWDM9380014-5M MPO 8 parallel fiber to 4 x LC duplex connectors, OM3 MM patch cord, 5 m.10GB-F10-SFPP 10Gb, Active optical direct attach cable with 2 integrated SFP transceivers, 10m. 10GBASE-LR. Long wavelength, long reach. 2002. XENPAK, X2, XFP, SFP. Fiber.No mode conditioning patch cord is required for applications over OM3 or OM4.[25].

Soz, switch-fondlers: Doesnt look like 2013 is 10Gb Ethernets year. — 10GE-SR VCSEL technology has significantly lower cost power than 10GE- LR DFB laser technology.Facebook IDC 10Gb/s Link Example. link element 10GbE server port patch cord: <100m patch panel fiber: 100m to 600m (1000m max) patch panel patch cord: <100m 10GbE switch X2 10gb lr patch cord. Get file See Kai Run Kids - Satchel Infant Toddler Olive Navy -Footwear more such devices are to follow throughout the following months. canon i560 drivers free download from brothersoft. COPPER. LANmark-6A for 10Gb/s Ethernet LANmark-6A Cable F/FTP LANmark-6A Cable F1/UTP LANmark-6A Snap-In Connector LANmark-6A Ultim Uniboot Patch Cord. No mode conditioning patch cord is required for applications over OM3.Using 4700 MHzkm MMF (OM4), up to 400m link lengths are possible. X2-10 GB-LR 10GBASE-LR Module supports a link length of 10 kilometers on standard single-mode fiber (SMF, G.652). Patch cord Cable OM3 multimode fiber optic core LC-LC diameter / ferrule 50/125 with current regulations technical specification.HP compatible transceiver X132 10Gb SFP LR module for SMF, 1310-nm wavelength, 10km, LC duplex connector, DDM/DOM support. Fibre Optic Patchcords. Mains Leads Power Cords. Power Distribution Units (PDUs). Part Finder.Home » Cisco and Cisco compatible products » Official Cisco X2-10GB-LR. If your optics are multi-mode then you need multi-mode patch cord. SFP-10G-SR, XENPAK- 10GB-SR and X2-10GB-SR are all multi-mode optics, so a multi-mode fiber can solveThe Cisco X2-10GB-LR module supports a link length of 10 kilometers on standard single-mode fiber (SMF, G.652). Is it possible to connect X2-10GB-LR to 10GBASE-SR with 4-5 metre patch cord? And can LC-SC patch cord connect X2-10GB-SR between SFP-10G-SR? These questions were asked by Cisco users?1000Base-SX, or 10GBase-S/LR4/LRM, and Fibre Channel 100/200/400/1200-MX Backwards.2M OM3 LC SC Fiber Patch Cable | 10Gb Duplex 50/125 LC to SC Multimode Jumper 2 Meter (6.56ft)Product Description. 10 Gigabit Performance for Critical Connections. These fiber cords are OM3 X2-10GB-LR X2 10GBASE-LR 1310nm 10km transceiver is 100 compatible with CISCO and comes with lifetime warranty.9380014-5M. Enterasys Compatible MPO 8 parallel fiber to 4 x LCs, OM3 MM patch cord, 5m. CX4-CBL-02. I would like to know which patch cord should I be using between X2-10GB-SR and SFP-10G-SR.You need to buy new 1310 SFP i.e you neeed Cisco SFP-10G-LR The Cisco 10GBASE- LR Module supports a link length of 10 kilometers on standard single-mode fiber (SMF, G.652). COPPER. LANmark-6A for 10Gb/s Ethernet LANmark-6A Cable F/FTP LANmark-6A Cable F1/UTP LANmark-6A Snap-In Connector LANmark-6A Ultim Uniboot Patch Cord. OM3 Mode Conditioning Patch Cord.IN SKU: X2-10GB-LR. The X2-10G-LR fiber optic transceiver module is a 1310nm singlemode product with max 10km working span. The X2 fiber optic transceivers are used in 10Gigabit Ethernet. To ensure that specifications are met, the transmitter output should be coupled through a mode conditioning patch cord.Using 4700 MHzkm MMF (OM4), up to 400m link lengths are possible. Cisco X2-10GB-LR. module is certified and tested by Cisco Optical interoperability with 10GBASE XENPAK, 10GBASE X2, andNo mode conditioning patch cord is required for applications over OM3 or OM4.Cisco SFP-10G-LR Cisco SFP-10G-LR-X Cisco SFP-10G-ER Cisco SFP-H10GB-CU1M Cisco Note: Conditioning patch cord cables are not supported on 10-GbE speeds. 2-6.10-Gb1E0-MGobdEuPleorPtosrts. Switch.ProCurve 10-GbE X2-SC LR optic (J8437A). Transmitter Optical Characteristics: Parameter. Fiber optic Patch cord.X2-10GB-LR X2-10GB-LR CISCO 10GB X2 OPTICAL TRANSCEIVER X2-10GB-LR 10GBASE-LR X2 transceiver module for SMF, 1310-nm wavelength, SC duplex connector. X2 10GB LR use dual SC optical interface, It is a hot-swappable input/output device plugs into an Ethernet X2 port of a Cisco switch or router to link the port with the network.LSZH fiber patch cord. No mode conditioning patch cord is required for applications over OM3 or OM4.Cisco SFP-10G-LR The Cisco 10GBASE-LR Module supports a link length of 10 kilometers on standard single-mode fiber (SMF, G.652). Cisco X2-10GB-LR The Cisco 10GBASE-LR module supports a link length of 10 kilometers on standard single-mode fiber (SMF, G.652).Patch cords with APC connectors are not supported. Table 1 provides cabling specifications for the Cisco X2 module. X2-10GB-LR X2-10GB-ER is Cisco 10GBASE-ER X2 1550nm 40km transceiver module, X2 10GB LR use dual SC optical interface, It is a hot-swappable input/output device plugs into an Ethernet X2 port of a Cisco switch or router to link the port with the network.Fiber patch cord. 1. Can we interconnect SFP-10G-SR to XENPAK-10GB-SR or X2-10GB-SR? The answer is yes. If your modules are singlemode you need singlemode patch cord.The X2-10GB-LR module supports a link length of 10 kilometers on standard single-mode fiber (SMF, G.652). XENPAK-10GB-CX4: InfiniBand 4x connector All others: Dual SC/PC connector. Note: Only connections with patch cords with PC or UPC connectors are supported. Minimum cabling distance for optical XENPAK modules (-LX4, -SR, -LR, -ER) is 2m, according to the IEEE 802.3ae standard 10GBASE-LR X2 MODULE 10Km Single mode Fiber.The X2-10GB-LR-NW a is a highly integrated serial optical module for high-speed, 10Gbit/s data transmission applications. 43.125Gbps Ethernet Signal Input by XAUI Interface. www.disqueenfrance.com. 10 Gigabit Ethernet Transceiver 10KM , 10gbase-Lr X2 Module X2-10GB-LR.Fiber Optic Equipment Solutions | FS.COM - Fiber Patch Cords, SFP/SFP Product/ServiceSFP,GBIC,XENPAK,X2,XFP,X2-10GB-SR,X2-10GB-LR,X2-10GB -ER,XENPAK-10GB-SRProduct range: -10Gbps SFP, XFP, XENPAK, X2 -Fast Ethernet SFP -Gigabit Ethernet (GbE) SFP, CWDMSellSC/LC/FC/ST/E2000 Fiber Optic Patch Cord. Sell10G XFP SR Optical Transceiver. Cisco X2-10GB-LR Compatible 10GBASE-LR X2 1310nm 10km DOM Transceiver Module.What is the simplest solution for connecting two Cisco Switches with 10GBASE-LR X2 Optics? Just one single-mode fiber patch cable. Technical Specifications. Class 10Gb SFP. LR Transceiver. (455886-B21).2m to 10km. Single Mode. Conditioning patch cord cables are not supported. For fiber patch cords, use Ultra Physical Contact (UPC) surface termination/polish. Patch Cord.M10GB-SFP-LR. SFP. Ipolex LC-LC Fiber Patch Cord, OM3 Multi-mode Duplex, LSZH, 2-Meter(6.56ft).Application OM3 classification rating operates with Gigabit Ethernet 1000Base-LX, 1000Base-SX, or 10GBase-S/ LR4/LRM, and Fibre Channel 100/200/400/1200-MX Backwards compatible with FDDI, and Fast Eliminates high attenuation in the E-band and allows operation over the entire 1260nm 1625nm wavelength range excellent for CWDM and DWDM applications 10Gig Patch Cords and Pigtails are tested per IEEE 802.3ae 10 GbE to support network transmission speeds up to 10 Gb/s for link To ensure that specifications are met, the transmitter output should be coupled through a mode conditioning patch cord.Cisco X2-10GB-LR The Cisco 10GBASE-LR Module supports a link length of 10 kilometers on standard single-mode fiber (SMF, G.652). Sopto Home. Fiber Optic Transceiver. 10G 1310nm 10km X2 LR SPT-X2-LR.Fiber Optical Patch Cords. Splitter CWDM DWDM. GEPON Solution.Note: 1. Measured at 10.3125Gb/s,Non-framed PRBS2 31-1,NRZ. Electrical PAD Layout. In stock 1x 10Gb/s Ethernet CNA (Compatible for intel X520-DA2) 1x 10Gb/s SFP LR 1x LC-LC SMF patch cord 10 Meters Warranty: 1 year Learn More.SKU: X540-10G-T2-X8. passive copper breakout, 5m 100Gb, QSFP28-2 x QSFP28 (2x50Gb)MMF OM3 MPO to 4xLC OM3 MMF patch cord, 5m (for use with 10319 QSFP SR4 4x 10Gb breakout) 40Gb QSFP LR4 optical module, LC, 10km SMF 40Gb QSFP Parallel Single Mode (PSM) LR4, MPO connector (8 fiber) Connectors: Dual LC/PC connector (-SR, -LRM, -LR, -ER, -ZR and FET-10G). Note: Only connections with patch cords with PC or UPC connectors are supported.Cisco SFP-10G-BXD-I Cisco SFP-10G-BXU-I Cisco SFP-10G-BX40D-I Cisco SFP-10G-BX40U-I Cisco SFP-H 10GB-CU1M Cisco Patch cords with APC connectors are not supported. All cables and cable assemblies used must be compliant with the standards specified in theSFP-10G-LRM Cisco FET-10G Cisco SFP-10G-LR Cisco SFP-10G-LR-X Cisco SFP-10G-ER Cisco SFP-10G-ZR Cisco SFP-H 10GB-CU1M Cisco Cisco Switching/Routing :: Switches Support SM Or MM Fiber Patch Cords WS-C2960Cisco Infrastructure :: Cat4510 Use Of X2 10Gb In 2 Line CardsCisco WAN :: X2-10GB-LR Having 10GB Uplink Between Two Buildings Cisco Optics Modules 10GBASE-LR X2 Transceiver ModuleCisco 10 Gbit/s GBIC 10GBASE X2-10GB-SR refurbishedPLC Hardware - Cisco X2-10GB-LR, New Surplus Sealed No mode conditioning patch cord is required for applications over OM3. 2007-2008 Cisco Systems, Inc. All rights reserved.

Cisco X2-10GB-LR The Cisco 10GBASE-LR Module supports a link length of 10 kilometers on standard single-mode fiber (SMF, G.652). Technical Specifications. Class 10Gb SFP. LR Transceiver. (455886-B21).2m to 10km. Single Mode. Conditioning patch cord cables are not supported. For fiber patch cords, use Ultra Physical Contact (UPC) surface termination/polish. Fiber Optic Patch Cords.X2 10GB LR fiber optic transceivers by Cisco are single mode modules max working distance is 10km. they are 10GB transceivers that are fully compatible with IEEE standards.

related posts


Copyright © 2018.